Pinterest
How to Install a New Headlight Assembly on a 2007-13 Toyota Tundra
Introduction
Replacing a headlight assembly on a 2007-13 Toyota Tundra is a relatively simple task that can be completed in less than an hour. By following the steps below, you can save yourself the cost of having a mechanic do the job.Step 1: Remove the old headlight assembly
To remove the old headlight assembly, you will need to use a 10mm socket wrench to remove the two bolts that hold it in place. Once the bolts are removed, you can pull the headlight assembly straight out of the truck.Step 2: Disconnect the electrical connectors
Once the headlight assembly is removed, you will need to disconnect the electrical connectors. To do this, simply squeeze the tabs on the connectors and pull them apart.Step 3: Install the new headlight assembly
To install the new headlight assembly, simply reverse the steps that you used to remove the old one. First, connect the electrical connectors. Then, push the headlight assembly into place and secure it with the two bolts.Step 4: Test the new headlight assembly
Once the new headlight assembly is installed, you should test it to make sure that it is working properly. To do this, simply turn on the headlights and check to see if the new assembly is illuminated. If you are having any problems installing the new headlight assembly, please consult your vehicle's owner's manual or a qualified mechanic. 
Pinterest
Komentar